Overview
Designed for long-term reliability and profitability our quarter frame trailer is great for asphalt applications when dumping into pavers or where lighter weight trailers are required for mid-range haul distances.
- Three body styles in Elliptical “U”, “J” & Square Bottom “L”
- Widths of 96″ & 102″
- Lengths of 22′-28′
- Capacities up to 39.8 cubic yards
- Continuous seam-welded design
- Handles sand-to-large aggregates, riprap, and asphalt
Dimensions for Elliptical “U”, “J” & Square Bottom “L” Body
- 96″ Wide / 84″ Inside
- Lengths of 22′-28′
- Side heights of 36″-60″ (in 6″ increments)
- Tailgate height 6″ higher than sides
- 18-33.4 Cubic Yard Capacity (Elliptical “U” only)
- 17-26.2 Cubic Yard Capacity (“J” only)
- 17-39.8 Cubic Yard Capacity (Square Bottom “L” only)
- 2 Year Warranty
Standard Features for Elliptical “U” Body
- 3/16″ high-tensile steel bulkhead and hoist well
- Conventional 7 gauge high-tensile steel, air-operated tailgate
- Recessed/rubber grommet mounted LED lighting for side body, tail, clearance, and back up lights to meet Federal Standard 108
- Heavy-duty hinges with 2-1/2″ diameter CR pin and 1/8″ NPT grease zerks
- 8″ diameter, telescoping hoist
- Continuous seam-welded design
- Rubber flaps, front corner mounted
- 36″ anti-sail, rear rubber mud flaps
- Drop-leg landing gear
- Single point-tandem suspension
- 2S/1M ABS braking system
- Steel disc 22.5 x 8.25 wheels with 11R22.5 LRG, 14-ply tires
- Epoxy primer and polyurethane top coat (chassis standard color is black)
The Elliptical “U”, “J” & Square Bottom “L” have many of the same optional features with these key differences
For Elliptical “U” Body:
- 3/16″ Hardox AR450 steel used for sides with 1/4″ Hardox AR450 floor UU
- 10 gauge high-tensile steel sides
- Cross-memberless, 10″ I-Beam longsill with Flex Inhibitors
For “J” Body:
- 10 gauge high-tensile steel sides
- 3/16″ high-tensile steel floor
- Cross-memberless, 10″ I-Beam longsill with Flex Inhibitors
For Square Bottom “L” Body:
- Vertical line posts with high-tensile steel sides
- 10 gauge high-tensile steel sides
- 3/16″ high-tensile steel floor
- Stacked, 4″ structural cross-member with 6″ I-Beam longsill
Base Options
For Elliptical “U”, “J” & Square Bottom “L” Body:
- 102″ body width
- Sloped front in 3/16″ or 1/4″ AR450 Hardox steel with external hoist mount
- Two way, side swing, and High-Lift tailgates
- Tailgate coal chute (maximum of three)
- Sealed tailgate kit
- 6″ or 8″ side boards in metal or wood
- Full body height exterior/internal ladder located front driver’s side
- Dirt-shedding angle for side top rail, tailgate, and hoist well
- Semi-auto or electric flip tarps, cable systems, or side roll tarps with choice of mesh or vinyl covers
- Additional recessed/rubber grommet mounted LED lighting for sides and rear facing in rear posts to meet Federal Standard 108
- In-cab wet line system/mounted control panel for hoist, tailgate, and tarp
- Additional air tank for increased capacity
- Under body vibrator
- Rubber flaps with anti-sail brackets or steel gravel guards for mount in front of suspension
- 2-speed landing gear
- Air ride tandem axle available for all lengths
- 4S/2M ABS braking system
- Steel disc wheels: 22.5 x 8.25 or 24.5 x 8.25 in multi-tire configurations
- Aluminum disc wheels: 22.5 x 8.25 or 24.5 x 8.25 in multi-tire configurations
- Custom paint colors
The Elliptical “U”, “J” & Square Bottom “L” have many of the same optional features with these key differences
For Elliptical “U” Body only:
- 1/4″ Hardox AR450 steel sides
- Multi-material selection for floor plate and tailgate
- Air ride tri-axle available for 28′ only
- Lift axles in 13.5K or 20K steerable, or 20K rigid for 28′ only
For Elliptical “J” Body only:
- Multi-material selection for sides, floor plate, and tailgate
For Square Bottom “L” Body only:
- Multi-material selection for sides, floor plate, and tailgate
- Stacked, I-Beam cross-member with 6″ I-Beam longsill
- Air ride tri-axle for 28′ only
- Lift axles in 13.5K or 20K steerable, or 20K rigid for 28′ only
